Ask About Coins

...

Error Coin

...now browsing by category

Error Coin

 

“The Roll Searchers’ Handbook” is on the way!

Saturday, September 12th, 2009

Hi All,

Being written and illustrated by Bill O’Rourke, the author of the “Found In Rolls” column, as seen in CoinWorld Magazine, “The Roll Searchers’ Handbook” is still in the works!

As I get further into the writing of this book, I am adding more and more of what will help you to identify those rare and valuable coins that you can locate as you search through rolls. The book is growing!

Keep an eye out as I will keep you updated as to my progress!

Have Fun,
Bill O’

Ask About Coins - "The Roll Searchers' Handbook"

Questions About Lamination Errors

Saturday, August 1st, 2009

I was recently asked several very interesting questions that pertain to a type of error known as a “Lamination Error” so I thought that I would share them with you!

QUESTION #1

I’ve heard about a type of error called a “lamination error”. Can you please tell me what that is?

1969-D Lincoln Cent - LAMINATION ERROR

1969-D Lincoln Cent - LAMINATION ERROR

A lamination error starts when impurities or gasses become trapped inside the metal strip as it is being rolled out to create the coinage strips used to make blanks that are ultimately used to make the planchets used to strike coins.

If, after a coin is struck, the impurity in the planchet is near the surface of the coin, a section can peel up or appear to be peeling from the surface of that coin. As seen on this 1969 D (Denver Mint) Lincoln Cent, a lamination error can appear as a jagged area of metal on the surface of the coin.

QUESTION #2

I’ve heard about something called a “split planchet error”. What is that all about?

Sometimes impurities or trapped gas in a planchet can be so bad that the entire planchet splits into pieces either before or after a coin is struck. When that happens, we can get something that we call a “split planchet” error.

1928 Indian Head Nickel - OBVERSE - SPLIT PLANCHET

1928 Indian Head Nickel - OBVERSE - SPLIT PLANCHET

Sometimes a coin can be struck on a full planchet that then splits into two halves with each half having the outer details the way they would appear on a normal coin. The inner portion would be rough and usually striated as that is how the inside of a planchet looks due to the process used to roll the metal into strips.

Also, in the case of a “split planchet” error that splits after the strike, we can usually see some of the details of the coin in the striated part of the metal that is imparted by the striking of the coin. The inner part of the planchet is actually effected by the strike so a ghostly image of the coins detail is seen.

1928 Indian Head Nickel - INTERIOR SURFACE - SPLIT PLANCHET

1928 Indian Head Nickel - INTERIOR SURFACE - SPLIT PLANCHET

It gets more complicated with a planchet that splits in two before the strike. The resulting coin can be weakly struck on one side and still somewhat “striated” on the other side but sometimes more details appear.

When we deal with coins that have plating that is compromised or missing, we describe them as plating errors. So if the actual plating is peeling, we wouldn’t usually call that a lamination error. If on the other hand, a plated cent should be struck on a planchet that is indeed suffering from the effects of an interior gas bubble or an interior impurity. We could see a lamination error on a plated coin.

Surface Bubbles on a Copper-Plated Zinc, One Cent Planchet

Surface Bubbles on a Copper-Plated Zinc, One Cent Planchet

That should not be confused with the little bubbles on the surface caused by corrosion that is taking place under the copper plating.

My New Online Book – Coming Soon – A Guide to Successful Roll Searching

Saturday, June 20th, 2009

Hi All,

I haven’t added any new articles recently but there is a GREAT reason for that! I have been busy putting together my “Guide to Successful Roll Searching”. Many people have asked me questions about how I go about finding all kinds of rare and interesting coins in rolls that I obtain at local banks.

As the author of the “FOUND IN ROLLS” column as seen in CoinWorld Magazine, I will give you some ideas and tips that can make your Roll Searching activities much more fruitful!

This book is already full of great pictures and I still have more to add.

Designed to be a book for readers of all levels of numismatic knowledge, I cut through the mystery of things like Varieties, Die Varieties and Errors. I will also show you what kinds of seemingly common coins can have great numismatic value.

Whether you are a Brand New Collector or a Seasoned Roll Searcher, this book is for you!

Check back often, the “Guide to Successful Roll Searching” should be online and ready to go within the next few weeks.

Have Fun,
Bill O’

A Great New Discovery!

Sunday, April 26th, 2009

While searching through rolls of cents obtained at his local bank, collector Richard J. Ziegler of Quincy, Massachusetts discovered what may be one of the most exciting Lincoln cent die varieties to emerge in recent times. In fact, Charles Daughtrey, owner of the website www.coppercoins.com, numismatic author and noted expert on Lincoln cents suggests that this may be one of the best Lincoln cent die varieties to be discovered during the past twenty years! I strongly agree!

It was a combination of events that led to the discovery of this coin being made public. Bobby Minnich and Susan Thornton owners of the Coin Community website found at http://www.coincommunity.com host an internet coin forum. Their website and forum have been in existence since February 1, 2005. The Coin Community discussion board is a friendly place where many facets of the numismatic hobby are routinely discussed. Members of the forum are invited to post photographs of their coins and in the interest of education, ask questions about them. One of the discussion boards and the one that happens to be my favorite is the “U.S.(United States) Variety and Error Coin Forum”. The coin seen here, first came to my attention on Sept 11, 2007 when a post by Mr.Ziegler (Ziggy9) was added to the U.S. Variety and Error section. The initial pictures of the coin in question that appeared in the post were done on a flatbed scanner. It was for that reason that the details were not clear enough to identify anything particularly special about the coin. It was later that same day when higher resolution pictures were taken and posted that the importance of this discovery became known. As soon as I saw the first picture, I had a feeling that this was an undiscovered and unlisted die variety. In fact, a major contributor by way of his answering many questions that appear on the Coin Community forums, Charles Daughtrey confirmed this. His comment; “At present, this 1982 DDR (Doubled Die Reverse) is UNIQUE! Only this piece has ever been reported in any way. I have checked all references and it simply doesn’t exist in print or on the web. That’s about to change!” Based upon the photo seen here, again I fully agree!

E PLURIBUS UNUM

E PLURIBUS UNUM

A coin collector during his childhood, Richard Ziegler states that he hadn’t looked at his coins in many years. It was while taking an inventory of a rather large collection of coins given by his mother-in-law to his three children, that his interest in numismatics as a hobby was rekindled. In pursuing his hobby Richard began to include searching through ten to twenty rolls of cents each week. It was in July of this year while Richard was sitting in his den looking through his recently acquired rolls with his 10X jewelers loupe that he made this startling discovery. As he describes the event, “It was the wide spread of the doubling as seen on the E of UNITED that first caught my attention”. Examining the rest of the coin other extreme doubling was readily apparent. The motto, E PLURIBUS UNUM exhibits remarkable doubling to the East and slightly South of the primary lettering. This lucky roll searcher and coin collector from the Commonwealth of Massachusetts had discovered a most amazing example of a 1982 Doubled Die Reverse Lincoln cent! How this die variety remained unknown for 25 years is a mystery to me!

TED of UNITED STATES of AMERICA

TED of UNITED STATES of AMERICA

In 1982, the United States Mint was in the process of changing the metallic composition of the cent. Along the way, the Mint also changed master dies which resulted in the production of Large Date as well as Small Date varieties of Lincoln cents. The four varieties struck on copper planchets, weighing 3.11 grams and composed of 95% copper and 5% zinc are the 1982 (Philadelphia Mint) Large Date, 1982 Small Date, 1982D (Denver Mint) Large Date, and the 1982S (San Francisco Mint)Proof version.

Also struck were four varieties on Copper-Plated Zinc planchets with a core composed of 99.2% zinc and 0.8% copper which was then plated with pure copper. Included are the 1982 Large Date, 1982 Small Date, 1982D Large Date and 1982D Small Date. Weighing in at approximately 2.5 grams which is the correct weight for a Copper-Plated Zinc composition cent, this 1982 Doubled Die Reverse cent was struck at the Philadelphia Mint on a Copper-Plated Zinc planchet. The approximate grade of this cent is AU-58 RB and it is an early-mid die state (EMDS) example.

This coin exhibits what is known as “Offset Hub Doubling”. Also described as a Class IV Doubled Die, While class IV doubling is scarce as a type, this has no reflection on the scarcity of this variety but I feel that this die variety is likely to be quite scarce. For a Class IV Doubled Die to occur, an impression is made by a hub into a die. The die is then removed from the hubbing press, is annealed and then returned to the press. If at this point the centers of the hub and the die are offset from one another, a subsequent impression into the die will be off-center. This off-centered (offset) alignment between the hub and the die will result in the creation of a die where all the doubling will be in one direction. Thus the term “Offset Hub Doubling”. Coins struck by that die will also exhibit doubling with a spread that is in one direction. The well known 1983 Doubled Die Reverse, Lincoln cent (Die#1) is a classic example of a Class IV Doubled Die.

One of the first people to see the pictures of this discovery coin other than Mr. Ziegler, Charles Daughtrey and this author was noted numismatist, Dr. James Wiles. As the Attributer of 20th Century United States Die Varieties for the Combined Organizations of Numismatic Error Collectors of America (CONECA), Dr. Wiles attributed this coin as being the first known of this die variety. In an email to Mr. Daughtrey, J.T. Stanton, Bob Piazza (Attributer with Charles Daughtrey at coppercoins.com), Richard Ziegler and myself, Dr. Wiles comments, “Very nice!!! I have listed it in the CONECA files as DDR-001, 1-R-IV, stage B, EMDS as per your (Charles Daughtrey’s) observations. Thanks for taking the initiative and letting us know about such an important discovery”. As Dr. Wiles explained this numerical system to me, DDR-001 is the first Doubled Die Reverse for a 1982 dated Philadelphia struck cent. 1-R-IV translates into Die#1, Reverse, Class IV Doubled Die. Stage B indicates the second stage in the die life sequence (A, B, C) with Stage B used to describe a Mid Die State coin. EMDS is a little more specific and describes an Early Mid Die State strike.

Strong doubling is also very easy to see on the R of AMERICA.

R of AMERICA

R of AMERICA

Additionally, well known attributers Bill Crawford, John Wexler, J.T. Stanton and Ken Potter have also looked at the images of this coin and proclaimed it to be the discovery coin of a new, Lincoln cent, doubled die variety.

There are several systems in use to label and identify Lincoln cent die varieties so Mr. Daughtrey has cross referenced the attribution numbers as follows:

1982P-1DR-001 (Charles Daughtrey, coppercoins.com)

1982P DDR-001 (1-R-IV) (CONECA, Combined Organizations of Numismatic Error Collectors of America)

FS 1982-01-801 (J.T. Stanton, “Cherrypickers’ Guide to Rare Die Varieties”)

1982P WDDR-001 (John Wexler, NCADD, The National Collectors Association of Die Doubling)

1982P CDDR-001 (Bill Crawford)

1982P VCR#7/DDR#1 (Ken Potter)

Congratulations and Thanks go to Richard Zeigler from the entire numismatic community for his Fantastic discovery of this 1982 Doubled Die Reverse Lincoln cent! Thanks also, to all the above mentioned individuals for the speed at which they responded to emails and phone calls. Thanks go especially to Mr. Charles Daughtrey for his photographs and hard work with respect to the research involved in declaring this coin a New Discovery! This writer truly enjoyed the close cooperation between all the parties involved as this was a picture of numismatics at its best!

1937 D Three Legged Nickel is Found In A Roll !

Wednesday, April 22nd, 2009

I am sometimes asked if any of the “Big Ones” ever turn up when I am searching through rolls. Collectors really want to know if any of the known, classic rarities are ever found as I am in pursuit of valuable coins as I search through rolls of coins that I obtain from local banks. My answer to this question is a resounding, YES, THEY ARE FOUND !!! and it is truly a FUN feeling of excitement when a fantastic find emerges from inside a roll of what should be very common coins!

In October of 2007, I was looking through some rolls of nickels that I had recently acquired from a local bank. The first unusual coin to emerge was a dateless Indian Head five-cent piece. I always get a kick out of finding any obsolete coinage in a roll so I was already grinning from ear to ear. The fact that this piece was dateless really didn’t matter to me, it was still fun!

What happened next was even more exciting! Also known as Buffalo nickels, another 1936 dated specimen was found in a roll. So, now there were two of these obsolete type coins on my table. Finally a third Buffalo nickel was found and it was dated 1937 D (Denver Mint). The mintmark, D can be found below the words FIVE CENTS in the exergue on the reverse of the coin.

1937 D Indian Head (Buffalo) Nickel - Mintmark

1937 D Indian Head (Buffalo) Nickel - Mintmark

The 1937 D Indian head or Buffalo five-cent piece is famous for a very particular rarity. That is, of course, a coin known as the Three-legged Buffalo five cent piece. In the process of preparing or repairing a die, the die in the area of one of the bison’s legs was abraded in such away that the defining edges of the legs were merged into the field of the coin. The end result is that on the struck coin, the leg seems to have been removed.

I turned the coin in order to take a closer look at the reverse and I couldn’t believe my eyes! It sure looked to me like this Buffalo(Bison)was standing on three legs.

1937 D Three-Legged Buffalo Nickel

1937 D Three-Legged Buffalo Nickel

The next thing I had to do was to determine if this coin was genuine or one of many fakes that have been manufactured. Normal 1937 D nickels are often encountered that have been tampered with to make it appear as though the Buffalo had a leg missing.

Small Raised Diagnostic Marks

Small Raised Diagnostic Marks

The first thing to look for as a diagnostic marker on a genuine coin is what looks like a line of raised dots from the middle of the bison’s belly to the ground. Not to sound crass, it is sometimes refered to as a peeing buffalo. This coin has the raised dots so I was halfway home on this one. The next thing to check is the motto E PLURIBUS UNUM seen above the buffaloes back. On a genuine example, the P of PLURIBUS and the U of UNUM do not touch the upper portion of the animal.

1937 D Three Legged Buffalo Nickel - E PLURIBUS UNUM

1937 D Three Legged Buffalo Nickel - E PLURIBUS UNUM

All the diagnostic markers were present on this coin and they were easy to identify as the coin is in Extremely Fine condition. Although I’ve been able to find some pretty amazing die varieties as I search through rolls of coins, I never expected that I could find this rarity in a roll of nickels that came from a local bank.

This coin was indeed the rare 1937 D Three-Legged Buffalo Nickel! I had hit the JACKPOT!


A Roll Searcher is Born!

Wednesday, April 22nd, 2009

Many coin collectors started out by looking through their pocket change to find any coins that might have seemed a little unusual. Often those coins would end up in jars or dresser drawers without being organized in any way. If at that time the coin collecting bug really bit, some people would move to the next step in their pursuit of their hobby.

Purchasing a coin folder from a coin shop or book store, the budding collector would begin to place the coins that were being found in circulation into the dated slots that were in the folders. Many coin folders, particularly in the case of United States coinage, will have slots for coins that are designed to be filled with circulating examples of each date and mint mark combination produced by the U.S. Mint.

One Page from a  Coin Album

One Page from a Coin Album

As their collections progressed, they would find that some coins could be difficult to find in circulation during the normal course of events.

Often, the next step in the hobbyist’s progression is to go to a bank and ask for rolls of coins to take home and look through so that it might increase the chances of finding the coins needed to fill in more of the slots in the coin folder. The new collector makes a life altering discovery! The idea really works!

It is in this way that a new “Roll Searcher” is born!

What Are Pennies (Cents) Made From?

Saturday, April 18th, 2009

What Are LINCOLN PENNIES (CENTS) Made From ?

The Composition of Lincoln cents has changed over the years. Some cents made of the wrong metal can be worth as much as $40,000.00 so you may want to read the following!

To start with most cents that appear to be of the wrong composition are probably plated or tampered with. This is not always the case but in a huge majority of cases the coins are not what they appear to be.

Here’s what is NORMAL !

Lincoln Cents minted from:

1909 to 1942 – BRONZE (.950 copper, .050 tin and zinc)

1919 Lincoln Cent

1919 Lincoln Cent

1943 – STEEL coated with ZINC

1943 Lincoln Cent - Zinc-Plated Steel

1943 Lincoln Cent - Zinc-Plated Steel

1944 to 1946 – BRONZE (.950 copper, .050 zinc) actually from salvaged WW II cartridge casings.

1945 Lincoln Cent

1945 Lincoln Cent

1947 to 1958 – BRONZE (.950 copper, .050 tin and zinc)

1958 Wheat Ears Reverse Lincoln Cent

1958 Wheat Ears Reverse Lincoln Cent

1959 to 1962 – BRONZE (.950 copper, .050 tin and zinc)

1962 Doubled Die Obverse

1962 Doubled Die Obverse

1963 to 1982 – BRONZE (.950 copper, .050 zinc)

1976 Lincol Cent

1976 Lincol Cent

1982 to Present – COPPER-PLATED ZINC (.992 zinc, .008 copper , plated with pure copper)

1990 Lincoln Cent - DAMAGED with ZINC exposed

1990 Lincoln Cent - DAMAGED with ZINC exposed

So That’s it in a nutshell! Another article will tell you what to look for to find that $40,000.00 JACKPOT COIN!

The 1943 Lincoln Penny (Cent) and Others!

Saturday, April 18th, 2009

There are some rare pennies (cents) that are struck on the wrong planchets. A planchet is the little disk of metal that is prepared to be struck into a coin. Sometimes a mix-up occurs that causes the wrong planchets to be struck into coins for a certain year. In 1943, for example, pennies (cents) were supposed to be struck on planchets made of STEEL, and PLATED with ZINC. Some leftover planchets from 1942 made of BRONZE accidentally got mixed in with the new, at the time ZINC-COATED STEEL planchets and were mistakenly struck into coins.

That being said, many questions arise about the 1943 dated cents. You should know what is normal and what is unusual on these coins and coins of other years that may be struck on the wrong planchets.

NORMAL 1943 Lincoln cents are made of STEEL plated with ZINC. NORMAL 1943 cents are grey in color unless they are rusted.

1943 Lincoln Cent - Steel Plated in Zinc - NORMAL COMPOSITION

1943 Lincoln Cent - Steel Plated in Zinc - NORMAL COMPOSITION

1943 P, D or S cents struck on BRONZE do exist but are extremely rare. This picture shows you the date on a genuine 1943 S Lincoln Cent that was struck on a Bronze Planchet.

1943 S Lincoln Cent - Struck in Bronze

1943 S Lincoln Cent - Struck in Bronze


Many are counterfeited. People take normal STEEL cents and plate them with COPPER in order to make them look like a cent struck in BRONZE. People also take 1948 dated cents and alter the date by removing the left side of the numeral 8 and leaving behind what looks like a 3 as the last digit in the date.

A copper plated forgery of a 1943 Bronze cent

A copper plated forgery of a 1943 Bronze cent

There are some 1944 Lincoln cents that were mistakenly struck on leftover ZINC -COATED STEEL planchets from 1943, so a NORMAL 1944 is BRONZE colored while there are some rare 1944 cents that are grey in color. Again, there are numerous counterfeits done by plating a normal 1944 cent.

In 1975, NORMAL cents were struck in BRONZE. The Mint did experiment, however with ALUMINUM and struck a few examples dated 1975 in Aluminum but no coins in that metal were to leave the Mint. Samples of these ALUMINUM cents were given to some members of Congress as examples to examine and an unknown, extremely small number that should have been returned to Mint officials escaped but rarely surface. So a white 1975 cent bears further examination but is still probably a plated forgery.

Part way into 1982, the composition of cents changed so some 1982 cents are made of the traditional material which is a copper alloy (BRONZE) and some are made of a mostly zinc core that is plated with a thin layer of copper.

From 1982 to the present, cents are made of the COPPER-PLATED ZINC material. On occasion, unplated planchets are struck and a light gray colored coin is the result. They need to be carefully examined as it is easy to remove the copper plating and coins of this date range that have been tampered with are often encountered. High school science experiments use these cents and there are experiments done that remove the copper and the altered coins can end up back in circulation.

On a cent dated 1964 or earlier, it is possible to actually have a “silver cent” (remember that “white (light gray) cents” are normally steel or zinc and not really silver) . On rare occasion, a planchet intended to be used to make a dime gets into the press and is struck by the dies intended to produce cents. A true “Silver Cent” is the result.

If that happened today, a cent would be grey in color as our dimes (for circulation) are made of two layers of nickel bonded to a copper core.

A Question About an Un-Plated Lincoln Cent

Saturday, April 18th, 2009

I found a penny (cent) dated 1991 D that should have the copper plating on it. This one seems to have the plating missing. Did I find a valuable coin?

Part way through 1982, The United States Mint changed the composition of cents to a copper-plated zinc. The core of the coin is composed of 98.2% zinc and 0.8% copper. The core is plated with pure copper. While it is possible for a coin before it was struck (in this case the blank) to have missed the process that involves the copper plating, it does not happen too often. For the production of cents, the Mint purchases the blanks that are manufactured by outside sources. The Mint however, does supply the outside sources with the zinc and the copper used for the manufacture of the blanks. It is unusual for the blanks to arrive at the Mint without having been plated.

Many science experiments in middle schools and high schools involve the removal of copper from the copper-plated zinc composition cents. Some experiments involve the use of nitric acid on the surface of the coin. The nitric acid will remove the layer of copper from the zinc core. Because there is some copper in the zinc core, the core will also be effected with the result being a slightly rough surface appearing on the coin. The nitric acid does not effect the zinc.

Your coin also exhibits remnants of the copper on the surface and on the edges that indicate that the copper that was once on the coin had been removed.

Unplated Lincoln cent

Unplated Lincoln cent

I placed a picture of your coin next to a genuine coin that missed the plating process. You can see the rough surface on the 1991 D dated coin as opposed to the smooth undamaged surface of the 1987 D dated coin.

Since your coin has been damaged by acid, it does not have any numismatic value.

Presidential Dollars…Can the Date and Edge Lettering be Upside Down?

Saturday, April 18th, 2009

When I recently opened a roll of the new George Washington dollars, I found 14 of them with the edge-incused inscriptions “E PLURIBUS UNUM,” and β€œIN GOD WE TRUST,” which could only be read with the reverse of the coin up. With the portrait of George Washington obverse up, the edge-incused inscriptions and date were upside down. Is this of any importance? Thank you.

It is normal for the lettering to be applied either way. The coins are struck first then they are placed in the mechanism that will letter the edges and date the coin.

Presidential Dollar Coins - Edge Lettering

Presidential Dollar Coins - Edge Lettering

There is no attention paid as to which way the coin is fed into the edge lettering machine. So some will come out with the lettering facing up in relation to the obverse and some will have the lettering up in relation to the reverse. In the overall scheme of things, statistically, over time, it should aproximate fifty percent being one way and fifty percent being the other.

It therefore is not an error but is indeed a normal part of the production. Still, I would want to collect one of each for my collection.

The PROOF versions of these coins are struck with a three piece collar that is engaged at the moment the coin is struck. Since these coins are fed into the coinage presses in a particular way, all proof coins in the Presidential dollar series should have the lettering facing “up” in relation to the obverse.

Copy Protected by Chetan's WP-CopyProtect.